5 Carpet Cleaning Methods

A very lucrative career change might be to start a carpet cleaning company. All you need to do next is get your hands on the right machines, such as equipment for pressure washing, portable carpet cleaning machines and commercial steam cleaners mounted on trucks. Do you want to learn more? Visit Emerald Carpet Cleaning Dublin. When you have prepared yourself with all the right equipment, the possibilities are infinite. You can provide a variety of services for your customers, including tile cleaning, carpet cleaning, tapestry cleaning, and pressure washing. Consider specialising in the restoration of water damage, stain removal and also grout cleaning.

Carpet cleaning is best performed with truck mounted machines, depending on the location. If you are entering into a multi-story building, then a portable carpet cleaner would suffice. There are multiple methods you can utilise to clean carpets. The following are five techniques that have been used over time.

Hot Water Extraction

Another name for this is steam cleaning. You can find great quality commercial carpet steam cleaners on Steam-Brite.com. This method requires you to spritz the carpet with a pre-spray, then agitate it using a machine with brushes or manually with a wand. Afterward, you hot water rinse the area to remove the soil and soap. The wand vacuums up the hot water that’s sprayed out in order to remove the pre-spray. You’ll need to decide whether the carpet is real or synthetic, so that the correct remedies are used. Be sure and provide air ventilation and help dry the carpets. This process requires a lot of water, so the carpets would be really dusty. Fans can also assist with drying periods. A truck installed carpet washing system has a lot of suction which can help clear most of the water from carpets.

Dry Compound

This includes of items that are 98 percent biodegradable. You scatter all over the carpet in an even layer and either wipe or sweep it in. The compound attracts dirt and grime, cleaning carpets immediately without water. For industrial uses, a cylindrical counter-rotating brush device is usually used.

Encapsulation

This phase originated in the 1990s. It encapsulates or crystallises soil particles, converting them into dried residue upon contact. In a way, these behave like tiny sponges, dissolving and then removing dirt from the carpet before being discarded. A cleaning solvent is then added using either a brush applicator, rotary system or compression sprayer. Before the washing process starts, the dried dust should be vacuumed off.

The Bonnet

In this method, you spray the surface of the carpet with a pre-spray, then scrub it in using a bonnet or round buffer. Similar to a floor buffer, it utilises a rotation motion. It features soil-attracting absorbent spin pads which are then repeatedly rinsed. During this process , water is used and may take a considerable amount of time to dry. It is important to note that only the top third layer of the carpet is addressed by this procedure. It is a fast solution and is not recommended for deep cleaning, such as stain and odour removal.

SHAMPOO

This is the older method that came about during the 1970s for cleaning carpets. This soon changed once encapsulation products and hot water extraction came to market. The shampoo consisted of coconut oil soaps, which create a foamy or sticky residue. This was a problem, since it attracts dirt and cause carpets to become dirty quickly. Rarely do you find this technique being used anymore.

Categories